•Insert Key but do not turn it on
•Press and hold the Trip Meter Reset Button
•While holding the reset button, start your car and continue holding the button
•Within 10 seconds, the display should change to "test" in LCD font and the needles will do a full sweeping. Release the Button
Pressing the button will now cycle through some 17 different modes
•1.Shows a Gauge Sweep
•2. Shows all 8′s on the LCD (LCD TEST)
•3. Illuminates all the bulbs on the dash
•4. Displays hexadecimal value for ROM level
•5. Displays the hexadecimal value for EE level
•6. Shows DTC (Diagnostic Trouble Code)
•7. Digital Speedometer - mph
•8. Digital Speedometer - kph
•9. N/A
•10. Digital tachometer
•11.Fuel volume
•12. Engine coolant temperature
•13. Battery voltage
•14. ABS fail
•15. Electronic brake distribution (EBD) failure
•16. Illumination
•17. Crank Sense
After you turn your engine off the digital display will go back to normal
FreeMoneyTricks